Position:Home > Steel > Super Alloy

UNS N06075

 We are professional UNS N06075 material factory from China

UNS N06075 is nickel-chromium alloy with controlled additions of titanium and carbon. Nimonic 75 has good mechanical properties and oxidation resistance at high temperatures
We could supply UNS N06075 super alloy in following forms:
Forging:Forged Rings,Forged Pipes,Rolled Rings,Forging Sleeves,Forging Disks,Forged Bushings,Forging Sleeves,Forged Tube Sheets,Forged Shafts,Forged Valve Parts(Valve Bodies,Valve seat rings,valve bonnets) and so on
Sheet,Plate,Strips,Coils
Bar:Round Bars,Square bars,flat bars,hollow bars,hex bars and so on
Pipe & Tube:Seamless tubes,seamless pipes,welded pipes,welded tubes,tubings,coiled tubes,U-bend Tubes.
Fittings (elbows, tees,stub-ends,returns,caps,crosses,reducers,and pipe nipples)
Wire:welded wires,wire rods
Flanges:in slip-ons,blinds,weld-necks,lapjoints,long welding necks,socket welds
Fasteners:bolts,screws,nuts,studs,Washers,Sockets,pins
Cnc Machining Parts,CNC turning parts,CNC Stamping parts
The Chemical composition of UNS N06075 is as follows:

Chemical Composition Limits

Weight%

Ni

Cr

Ti

C

Si

Cu

Fe

Mn

UNS N06075

Bal

18.9 - 21.0

0.2 / 0.6

0.08 / 0.15

1.0 max

0.5 max

5.0 max

1.0 ma

The mechanical property of UNS N06075 is as follows
 

Properties

Imperial

Tensile strength(annealed)

109 ksi

Yield strength(annealed)

40 ksi

Elongation at Break

42%

Modulus of Elasticity

29878 ksi

Following is heat treatment details of UNS N06075
For bar 30-60 minutes at 1050°C (1920°F) followed by
air cooling.
For sheet 5-10 minutes at 1050°C (1920°F) followed by air
cooling or, before welding, 5-10 min/1050°C
(1920°F)/AC + an optional 10 min/1050°C
(1920°F)/AC.
UNS N06075  has a stable, austenitic, solid solution at all temperatures below the solidus and, apart from recrystallization and grain growth, is unaffected by heat treatment
Welcome the inquiry
Hits:  UpdateTime:2014-12-01 20:02:22  【Printing】  【Close
Previous:Nimonic 75
Next:Alloy 59