Position:Home > Steel > Super Alloy

Inconel Alloy 602CA

We are professional Inconel 602CA,Inconel 602 CA,Alloy 602 CA material factory from China

Inconel Alloy 602CA is the most oxidation resistant/high strength nickel alloy available. It is capable of extreme temperature use up to 2250°F (1232°C). For thermal processing applications where minimal product contamination is necessary, the oxidation/scaling resistance of  602 CA is extremely desirable. A high chromium content, along with aluminum and yttrium additions, allows the alloy to develop a tightly adhering oxide scale
We could supply inconel 602 CA super alloy in following forms:
Forging:Forged Rings,Forged Pipes,Rolled Rings,Forging Sleeves,Forging Disks,Forged Bushings,Forging Sleeves,Forged Tube Sheets,Forged Shafts,Forged Valve Parts(Valve Bodies,Valve seat rings,valve bonnets) and so on
Sheet,Plate,Strips,Coils
Bar:Round Bars,Square bars,flat bars,hollow bars,hex bars and so on
Pipe & Tube:Seamless tubes,seamless pipes,welded pipes,welded tubes,tubings,coiled tubes,U-bend Tubes.
Fittings (elbows, tees,stub-ends,returns,caps,crosses,reducers,and pipe nipples)
Wire:welded wires,wire rods
Flanges:in slip-ons,blinds,weld-necks,lapjoints,long welding necks,socket welds
Fasteners:bolts,screws,nuts,studs,Washers,Sockets,pins
Cnc Machining Parts,CNC turning parts,CNC Stamping parts
Inconel 602CA's chemical Composition is as follows:

 

Cr

Ni

C

Al

Ti

Y

Zr

Mn

Si

Cu

Fe

MIN

24.00

 

0.15

1.80

0.10

0.05

0.01

--

--

--

8.00

MAX

26.00

Balance

0.25

2.40

0.20

0.12

0.10

0.15

0.50

0.10

11.00

Following is mechanical property of inconel 602 CA

Rm (KSI)

≥ 98.5

Rp 0,2 (KSI)

≥ 39.5

Rp 1,0 (KSI)

≥ 45.2

A (%)

≥ 30

Following is production standard of inconel alloy 602CA
ASME Code Case 2359, ASME SB 166, ASME SB 168
ASTM B 166, ASTM B 168
ERNiCrFe-12
Inconel 602 ca is one of the most oxidation resistant nickel alloys available. Chromium (25%) supplemented with aluminum (2.2%) and a micro-alloying addition (0.1%) yttrium form a very thin protective oxide scale. The aluminum addition allows for the formation of a continuous homogenous self repairing AI2O3 subscale. The addition of yttrium improves the adhesion and spalling resistance of the chromium and aluminum oxide scales. The extremely low scaling rate of 602 CA makes it an excellent candidate for applications such as high purity alumina calciners, where minimal contamination from scaling is permissible
Welcome the inquiry
Hits:  UpdateTime:2014-11-30 13:48:55  【Printing】  【Close
Previous:UNS N07751
Next:UNS N06025