Position:Home > Steel > Super Alloy

Incoloy Alloy 901

We are professional Incoloy 901,Alloy 901 material factory from China

Incoloy Alloy 901 is an age-hardenable Ni-Fe-Cr superalloy with significant additions of molybdenum, titanium and aluminum. The alloying route for this high performance material may include combinations of vacuum induction melting, vacuum arc remelting and electroslag remelting, according to the final application and the customer’s specification. Typically, the alloy is used for gas turbine engine discs, shafts, rings, casings and seals with a maximum service temperature of around 600°C (1100°F).
We could supply Incoloy 901 super alloy in following forms:
Forging:Forged Rings,Forged Pipes,Rolled Rings,Forging Sleeves,Forging Disks,Forged Bushings,Forging Sleeves,Forged Tube Sheets,Forged Shafts,Forged Valve Parts(Valve Bodies,Valve seat rings,valve bonnets) and so on
Sheet,Plate,Strips,Coils
Bar:Round Bars,Square bars,flat bars,hollow bars,hex bars and so on
Pipe & Tube:Seamless tubes,seamless pipes,welded pipes,welded tubes,tubings,coiled tubes,U-bend Tubes.
Fittings (elbows, tees,stub-ends,returns,caps,crosses,reducers,and pipe nipples)
Wire:welded wires,wire rods
Flanges:in slip-ons,blinds,weld-necks,lapjoints,long welding necks,socket welds
Fasteners:bolts,screws,nuts,studs,Washers,Sockets,pins
Cnc Machining Parts,CNC turning parts,CNC Stamping parts
Incoloy 901's chemical Composition is as follows:
Nickel...................................................................................42.5
Chromium ............................................................................12.5
Molybdenum........................................................................5.75
Titanium.................................................................................2.9
Cobalt ...........................................................................1.0 max.
Copper..........................................................................0.5 max.
Manganese ...................................................................0.5 max.
Silicon ...........................................................................0.4 max.
Aluminum....................................................................0.35 max.
Carbon..........................................................................0.1 max.
Sulfur ..........................................................................0.03 max.
Iron ...............................................................................Balance*
Following is mechanical property of Incoloy 901

Status

Tensile  strength
 Rm N/mm2

Yield  strength

RP0.2N/mm2

Elongation

A5  %

Incoloy  901

1034

689

12

Following is production standard of Incoloy alloy 901
BR HR 55, SAE
AMS 5660, SAE AMS 5661, AECMA PrEN2176,
AECMA PrEN2177, ISO 9723, ISO 972
Traditional machining methods that are used for iron-based alloys can be used for Alloy 901. During high speed operations such as grinding, turning, or milling, water-based coolants are preferred. The use of heavy lubricants while drilling, tapping, broaching or boring is recommended. In cases where turning with a continuous cut is performed, carbide tools are suitable
Welcome the inquiry
Hits:  UpdateTime:2014-11-30 17:30:27  【Printing】  【Close
Previous:UNS N09945
Next:UNS N09901