Position:Home > Steel > Stainless Steel

1.4406

 We are professional 1.4406 Forged forging Steel Round Bars Rods Square rectangular rectangle Flat Hex Bars,1.4406 Forged Forging Steel Hollow Bars Forged Forging Sleeves Bushes Bushing Pipes Piping tube tubings barrels Casing Cases Shells cylinders hubs housings,1.4406 Seamless Rolled Steel Rings 1.4406 Forged Forging Steel rings,1.4406 Forged Forging Steel Blocks Discs Disks Plates,1.4406 Forged Forging Steel shafts forging flanges,and other 1.4406 forged forging parts Forged Products forged forging pieces forged forging steel components materials from china

 


Chemical composition %   of   steel    (1.4406):   EN 10088-2-2005
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended.
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.
C Si Mn Ni P S Cr Mo N
max   0.03 max   1 max   2 10 - 12.5 max   0.045 max   0.015 16.5 - 18.5 2 - 2.5 0.12 - 0.22


Mechanical properties of   steel   (1.4406)

Rm - Tensile strength (MPa) (+A) 580-800


Rp0.2 0.2% proof strength (MPa) (+A) 280-315


KV - Impact energy (J) transverse, (+A) +20°
60
-196°
60
KV - Impact energy (J) longitud., (+A) +20°
100


A - Min. elongation at fracture (%) (+A) 30-40
A - Min. elongation at fracture (%) longitud., (+AT) 45


  Brinell hardness   (HB):   (+A) 250


Properties of   steel    (1.4406)
Resistance to intergranular corrosion: in the delivery condition - yes; in the sensitized condition - yes 
Steel shal not be applied at a metal temperature lower than -270 ° C
 
Hits:  UpdateTime:2017-07-05 09:54:29  【Printing】  【Close