Position:Home > Steel > Alloy Steel

Z40CDV5

 We could produce Z40CDV5 Forged forging Tool Die Steel Round Bars Rods Square rectangular rectangle Flat Bars,Z40CDV5 forged forging rolls roller shafts,Z40CDV5 Forged Forging tool die Steel Hollow Bars Forged Forging Sleeves Bushes Bushing Pipes Piping tubes tubings barrels Casing Cases Shells cylinders hubs housings,Z40CDV5 Forged Forging Steel Rings Seamless Rolled Rings,Z40CDV5 Forged Forging Steel Blocks Discs Disks Plates,Z40CDV5 forged forging Inserts cores,Z40CDV5 cavities for die casting dies pressure die casting tools,Z40CDV5 die casting shot sleeves,Z40CDV5 hot forging dies,Z40CDV5 Aluminum extrusion dies extrusion tools Extrusion Stems Extrusion die holders extrusion liner dummy blocks,and Z40CDV5 plastic mold cavities,Z40CDV5 Forming Punches,Z40CDV5 Hot Forging Dies stamping dies,Z40CDV5 hot Shear Blades,Z40CDV5 Plastic Mold Dies,and Z40CDV5 Bolt Dies,Z40CDV5 pressure casting dies for light metals, mandrels, dies, liners, dieholders, bolsters,dummy blocks and containers for metal tube and rod extrusion tools,  hot forming dies for steels, brass and aluminum, tools and dies for the manufacture of hollow bodies, screws,nuts, rivets and bolts, moulds, worms and cylinders for the processing of plastics, press dies and die inserts, rolls for profiling tools,hot extrusion equipments, trimming tools, plastic moulding dies, severe cold punching, scrap shears, shrink rings, wear resisting parts, cold heading die casings, hot gripper and header dies, nitrided ejectors. other Z40CDV5 forged forging parts forged forging pieces forged forging steel components products material as per the requirement

 

Chemical Composition

The following table shows the chemical composition of Z40CDV5 tool steels.

Element Content (%)
Chromium, Cr 4.75-5.50
Molybdenum, Mo 1.10-1.75
Silicon, Si 0.80-1.20
Vanadium, V 0.80-1.20
Carbon, C 0.32-0.45
Nickel, Ni 0.3
Copper, Cu 0.25
Manganese, Mn 0.20-0.50
Phosphorus, P 0.03
Sulfur, S 0.03

Physical Properties

The physical properties of Z40CDV5 tool steels are given in the following table.

Properties Metric Imperial
Density (@20°C/68°F) 7.80 g/cm3 0.282 lb/in3
Melting point 1427°C 2600°F

Mechanical Properties

The mechanical properties of Z40CDV5 tool steels are tabulated below.

Properties Metric Imperial
Tensile strength, ultimate (@20°C/68°F, varies with heat treatment) 1200 - 1590 MPa 174000 - 231000 psi
Tensile strength, yield (@20°C/68°F, varies with heat treatment) 1000 - 1380 MPa 145000 - 200000 psi
Reduction of area (@20°C/68°F) 50.00% 50.00%
Modulus of elasticity (@20°C/68°F) 215 GPa 31200 ksi
Poisson's ratio 0.27-0.30 0.27-0.30

Thermal Properties

The following table shows the thermal properties of Z40CDV5 tool steels.

Properties Conditions
T (ºC) Treatment
Thermal expansion 10.4 x 10-6/ºC 20-100 -
Thermal conductivity 28.6 W/mK 215 -
Hits:  UpdateTime:2017-05-12 12:36:31  【Printing】  【Close
Previous:4Ch5MF1S
Next:X153CrMoV12