Position:Home > Steel > Alloy Steel

X20CrMoV11-1

 We are professional X 20 CRMoV 11-1,X20CrMoV11-1,X20CrMoV111,X 20 CrMoV 11 1,X20CrMo 11-1,X20CrMoV11.1 Forged forging Steel Round Bars Rods Square rectangular rectangle Flat Hex Bars,X20CrMoV11-1 Forged Forging Steel Hollow Bars Forged Forging Sleeves Bushes Bushing Pipes Piping tubes tubings barrels Casing Cases Shells cylinders hubs housings,X 20 CRMoV 11-1,X20CrMoV11-1,X20CrMoV111,X 20 CrMoV 11 1,X20CrMo 11-1,X20CrMoV11.1 Seamless Rolled Steel Rings X 20 CRMoV 11-1,X20CrMoV11-1,X20CrMoV111,X 20 CrMoV 11 1,X20CrMo 11-1,X20CrMoV11.1 Forged Forging Steel rings Steam turbine Gland Seal Sealing Guide Rings,X 20 CRMoV 11-1,X20CrMoV11-1,X20CrMoV111,X 20 CrMoV 11 1,X20CrMo 11-1,X20CrMoV11.1 Forged Forging Steel Blocks Discs Disks Plates ,X 20 CRMoV 11-1,X20CrMoV11-1,X20CrMoV111,X 20 CrMoV 11 1,X20CrMo 11-1,X20CrMoV11.1 compressors steam turbines Blades impellers Bolts Studs Rotor shafts Wheels,X 20 CRMoV 11-1,X20CrMoV11-1,X20CrMoV111,X 20 CrMoV 11 1,X20CrMo 11-1,X20CrMoV11.1 Forged Forging Gate Check Control Valve Bonnets Body Bodies Valve Stems Spindles Rods Valve seats Valve Discs and other X 20 CRMoV 11-1,X20CrMoV11-1,X20CrMoV111,X 20 CrMoV 11 1,X20CrMo 11-1,X20CrMoV11.1 forged forging forge Steel parts forged forging pieces forged forging steel components material from china

 


Chemical composition %   of   steel   X20CrMoV11-1 
According to EN 10088-1:2005: Si max =0.4; Mn min= 0.3 ; V min=0.2;
C Si Mn Ni P S Cr Mo V
0.17 - 0.23 max   0.5 max   1 0.3 - 0.8 max   0.025 max   0.015 10 - 12.5 0.8 - 1.2 0.25 - 0.35


Mechanical properties of   steel   X20CrMoV11-1 

Rm - Tensile strength (MPa) (+NT) 690-840
Rm - Tensile strength (MPa) (+QT) 700-850


ReH - Minimum yield strength (MPa) (+NT) 490


Rp0.2 0.2% proof strength (MPa) (+QT) 500


KV - Impact energy (J) longitud., (+NT) +20°
40
KV - Impact energy (J) longitud., (+QT) +20°
27-39
KV - Impact energy (J) transverse, (+QT) +20°
27


A - Min. elongation at fracture (%) longitud., (+NT) 17
A - Min. elongation at fracture (%) transverse, (+NT) 14
A - Min. elongation at fracture (%) (+QT) 15-16

Hits:  UpdateTime:2017-03-29 18:25:35  【Printing】  【Close
Previous:X20CrMoV12-1
Next:AISI 4150